K
Knight’n Game
Guest
Anyone know how to make some animal toys from stuff I can find around the house? I’ve tried the balloon thing. (Basically inflate a balloon inside you) It felt good.
Also, if you've got a bit of time and money to invest, working with silicone really isn't that hard. You'll need a few things like a vacuum chamber (~$150), some platinum cure silicone (always use platinum cure for sex toys, this type does not off-gas over time) resin that usually comes in 2 parts and of a durometer (a measure of hard or softness or rubbers, silicone, and polyurethanes) you'd like, a mold (clay, 3d printing, something...), and mold release spray.
It takes a bit of practice to find a method that works for you. When I gave it a shot I 3D printed a shape, used the "paint on" method to create a reverse mold, waited for that to cure, then applied mold release to the reverse mold and poured my final product silicone resin into that. There are a lot of ways you could go about it, so you just have to experiment to find a method that works for you.
i have a 3D printer pen. Would that work?Also, if you've got a bit of time and money to invest, working with silicone really isn't that hard. You'll need a few things like a vacuum chamber (~$150), some platinum cure silicone (always use platinum cure for sex toys, this type does not off-gas over time) resin that usually comes in 2 parts and of a durometer (a measure of hard or softness or rubbers, silicone, and polyurethanes) you'd like, a mold (clay, 3d printing, something...), and mold release spray.
It takes a bit of practice to find a method that works for you. When I gave it a shot I 3D printed a shape, used the "paint on" method to create a reverse mold, waited for that to cure, then applied mold release to the reverse mold and poured my final product silicone resin into that. There are a lot of ways you could go about it, so you just have to experiment to find a method that works for you.
Do you know some shops for the silicone? Europe preferably?
i have a 3D printer pen. Would that work?
Here are some photos
Do not worry, I'm about to make bigger ones.So Tiny & cute, like sex toys for Vermin,
Do not worry, I'm about to make bigger ones.
i would do the same as @Bigpaws_Bear if i was able to buy a 3d priter as i want one really bad.
@Wrongkindoflove that looks awesome i should really buy a 2 hole horse fleshlight
now to the question: we have inside a group im in one that clay sculpt a horse dick or horse or really waky ones out of clay, makes a mold and then makes them out the right materials.
really they have that filament? damn i love the future
I really love this so much.Half of mine is home made. Dirtyinternettoys mare holes stuffed crudely in to this lovely little ?.
Nice and sturdy to hold and very soft.
What are you using tpe filament I have a printer right now pretty big plate but need to upgrade to an enclosed environment if I'm going to print tpeHere are some photos
What are you using tpe filament I have a printer right now pretty big plate but need to upgrade to an enclosed environment if I'm going to print tpe
I think people really got worried about anything not silicone for toys because it doesn't leech chemicals over time, stays the same shape even after many compressions / bends, it's non-porous so bacteria doesn't grow, and it doesn't react with anything like diferent type of lube. I'd be really interested if there was a 3d printer filament that can do that.
I see you make your casting mold out of pla and then you fill it in with your Silicone got you I thought you were printing the toys on your build plateI use PLA and i have the Anycubic Predator. It can print 0.05mm layer height.
And now I have finished the first form for a fleshlight.
One could still use the anchient "lost wax" method that has been used for molds for centuries! First you mold, carve your desired toy in candle wax with all desired details. Make a leak resistant box at least an inch larger than the toy in all directions. Suspend toy in the box and fill with plaster of Paris. Once that has cured remove your mold from the box. Gently heat the mold just warm enough to melt the wax (save it to use again later. Once the was is "lost" carefully cut your mold in half. Once your mold is cut use finishing tools to clean any rough surfaces and reassemble held lightly together with tape, rubber bands etc and fill with your silicone mixture (you can coat the inside of the mold with breaker solution). Once youe silicone has pre cured remove your mold and allow the toy to fully cure. For penetratable toys you will also need a plaster "dick" to mold the interior passage.
Some one have a STL or Other 3D model of a Mare/Pony Vagina/pussy
Preferably with wink clitoris and anus.
to make a Silicon model ?
I've printed a lot of different materials
PLA
nylon
Teflon
ABS
Polycabonite
My favorite material so far has been ABS, so I use it for a LOT of my printing.