• Suddenly unable to log into your ZooVille account? This might be the reason why: CLICK HERE!

Magnetic cock rings?

ponylovindude

ponylovindude

Tourist
Hey guys! I figured since this area of the site is slightly sex orientated this would be the best spot. Since it also is not an animal toy.

I'm into cock rings, the metal ones. I'm curious to see how snug I could get one without injury. However I am all aware of what happens if it's too tight and the blood starts swelling and well it's going to be a trip to the er or cut it off yourself. Are there any magnetic rings out there? From sites that ship discrete in the US? Figured if it's too damn tight just snap it off. Thanks!
 
Hi, I was wondering if anyone knows where to get a good metal cock ring that is magnetic.

I like the idea of not being able to pull it off until you orgasam and the boner gets soft.....but also too tight can mean a trip to the er. Hence a magnetic ring would be the trick, just snap it off. Saw one on temu...but I think I'll pass from them lol

Thanks, I guess?
 

Attachments

  • 514joiZal3L.jpg
    514joiZal3L.jpg
    34.4 KB · Views: 5
Would have to be super strong rare earth magnets, and those things can be seriously dangerous.
 
The magnetic model doesn't have enough room around the axial ends to result in "really strong adhesion".
It would be easy to lift one side with a tool or even just fingers and then just move it sideways as to "peel it off" which reduces the intensity of the magnetic field's adhesion. Leverage always helps.

If you find one which is at least 1/2" or 12 mm in diameter.. (the ring), then it could actually get hard to separate without pinching your skin multiple time by the tries (which will be painful).

Just out of industrial experience with N48 and N52 neodymium magnets. ?‍♂️ Simple analysis.

If you want something which locks into place while still being able to remove it if an accident happens, a real lock mechanism and two-part ring concept would work the best. It stays locked as long as you don't use the key and gets loose (even with a swollen member inside) if unlocked. But not sure if those are still produced. I'm not into such things, just into technologies, hah.

pes said:
You can also get something with screws:
Click to expand...

I already imagine someone with two left hands and a swollen blueish-reddish member in cold sweat while stressed twitching occurs while trying to actually remove that dang thing. After the hex key fell down seven times he gets a slight nervous breakdown. :ROFLMAO:

Advantage of such a solution is: it exists in all diameters. Because it's as well existing as two-parted depth stop ring for bigger drills. Or smaller drills. Depending on the phallic properties. Or SM attractions. :ROFLMAO:
 
pes said:
You can also get something with screws:
1700606955192.png
Click to expand...
James Bond endorses cock rings?
 
  • Haha
Reactions: pes
YanchaOkami said:
The magnetic model doesn't have enough room around the axial ends to result in "really strong adhesion".
It would be easy to lift one side with a tool or even just fingers and then just move it sideways as to "peel it off" which reduces the intensity of the magnetic field's adhesion. Leverage always helps.

If you find one which is at least 1/2" or 12 mm in diameter.. (the ring), then it could actually get hard to separate without pinching your skin multiple time by the tries (which will be painful).

Just out of industrial experience with N48 and N52 neodymium magnets. ?‍♂️ Simple analysis.

If you want something which locks into place while still being able to remove it if an accident happens, a real lock mechanism and two-part ring concept would work the best. It stays locked as long as you don't use the key and gets loose (even with a swollen member inside) if unlocked. But not sure if those are still produced. I'm not into such things, just into technologies, hah.



I already imagine someone with two left hands and a swollen blueish-reddish member in cold sweat while stressed twitching occurs while trying to actually remove that dang thing. After the hex key fell down seven times he gets a slight nervous breakdown. :ROFLMAO:

Advantage of such a solution is: it exists in all diameters. Because it's as well existing as two-parted depth stop ring for bigger drills. Or smaller drills. Depending on the phallic properties. Or SM attractions. :ROFLMAO:
Click to expand...
Oh dear gawd you are cracking me up. I'd just like to find one that's snug enough, but too snug and you are in a pickle.

Technically a two part shaft collar could be used as well. And hey, who says Allen keys, bring on the impact gun!?
 

Attachments

  • 93b1832cbf0a016f06b32168f667bd91bda10c7713419a222483bde3f7aa9721_1.jpg
    93b1832cbf0a016f06b32168f667bd91bda10c7713419a222483bde3f7aa9721_1.jpg
    90.1 KB · Views: 11
Try Alibaba and silicone rings, which can be tight, but they are stretchy, and for your sake get the right size. Ego aside, they come in Metric sizes, effectively medium, large and XL. There are also Stainless Steel equivalents, but size is extra-important there. They weigh a ton, especially the teardrop shape, but they are fun. Temp play and all that.
These are all one-piece
construction. I can't imagine snapping a hinged item on Myself. Rather like getting caught in a zipper.

Alibaba's products are inexpensive, and the company is reliable.
 
Definitely following this post! I have only ever used silicone and rubber ones! They have all worked amazing but those others could be fun
 
I want to say I've seen bolo style ones that have a slip-adjustable bead, I think that would be a better choice. Having a cock ring made of multiple magnets, especially ones strong enough to constrict a penis, sounds to me like a recipe for a horrific pinch.
 
You must log in or register to reply here.
Back
Top